Overspeed Governor-AF-C05

Short Description:

Overspeed Governor is one of the safety control components in the elevator safety protection system. It monitors and controls the speed of the cabin at any time. When the elevator is running for any reason, the cabin is overspeeding or even in danger of falling, and all other safety protection devices do not work, Overspeed Governor and Safety Gear act in linkage to stop the elevator cabin. In order to avoid casualties and equipment damage accidents.

Start condition:

1) When the car speed exceeds 115% of the rated speed

2) For momentary type safety gear, speed of 0.80 m/s (except roller type).

3) For roller type momentary safety gear, the speed is 1.0 m/s.

4) For safety gear with cushioning effect, and for progressive safety gear for rated speeds not exceeding 1.0 m/s, a speed of 1.5 m/s.

5) For progressive safety gear for rated speeds exceeding 1.0 m/s, a speed of 1.25*v+0.25/v.

Send email to us

Product Detail

Product Tags

Mode: AF-C05

Two way Governor Machine roomless

Cover the specifications(Rated speed): ≤0.63m/s 0.75m/s 1.0m/s 1.5~1.6m/s 1.75m/s

Suitable location: Capsules side on the heavy side

Technical parameters: Rope wheel diameter:φ240mm φ200mm(only applicable when V≤1.0m/s or less)

Speed limit wire rope: Standard φ6mm,fittings selection φ8mm

Electric connection: Test action switch XS1-28 must provide DC24V or AC220V power(specific according to the requirements of electromagnet model) continuous polarization time for 10 seconds or less; Speed limit action XS1-23 of switch wiring connection safety circuit, the coil should be provided to provide DC24V or AC220V power(depending on the demamds of switch voltage)(you may refer to connection form above)